Department of Mechanical Engineering

THE UNIVERSITY OF LARKANO

PUBLICATIONS-ME

Dr Junaid Iqbal Bhatti

 

  1. Iqbal, J.; Zuhaib, K.M.; Bughio, A.M.; Abid, S.; Shah, A.; Bhatti, M.T. Electric Vehicle Cornering Stiffness & Lateral States Estimation Using Synchronized Adaptive Sliding Mode Observer and Kalman Filter. Int. Trans. J. Eng. Manag. Appl. Sci. Technol.2021, 1–11, doi:10.14456/ITJEMAST.2021.34.
  2. Zuhaib, K.M.; Iqbal, J.; Bughio, A.M.; Bukhari, S.A.S.; Kanwar, K. Collision Avoidance of a Kinodynamically Constrained System from Passive Agents. Eng. Technol. Appl. Sci. Res.2021, 11, 6760–6765, doi:10.48084/etasr.4022.
  3. Bughio, A.M.; Iqbal, J.; Zuhaib, K.M.; Khan, U.A.; Nizamani, N. Oxide Variability Analysis Exploiting Greens Function Simulations. Int. Trans. J. Eng. Manag. Appl. Sci. Technol.2021, 1–7, doi:10.14456/ITJEMAST.2021.43.
  4. Bughio, A.M.; Iqbal, J.; Zuhaib, K.M.; Uqaili, J.A.; Khan, U.A. Comparison Of Parasitic Performance Of Shorted Gate And Independent Gate FinFETs. Int. J. Sci. Technol. Res.2021, 10, 8–11.
  5. Khan, S.; Lee, D.H.; Khan, M.A.; Gilal, A.R.; Iqbal, J.; Waqas, A. Efficient and improved edge detection via a hysteresis thresholding method. Curr. Sci.2020, 118, 954–960, doi:10.18520/cs/v118/i6/954-960.
  6. Abid, S.; Shah, A.; Leghari, I.A.; Bhatti, J.I.; Raza, S.; Koondhar, M.A.; Channa, I.A.; Usman, M. The Design of Low-Cost Synchronous Reluctance Motor with a Surrogate-Assisted Optimization Technique. Sukkur IBA J. Emerg. Technol.2020, 3, 24–39, doi:10.30537/sjet.v3i2.587.
  7. Abid, S.; Shah, A.; Zanjani, S.S.; Leghari, I.A.; Bhatti, J.I. The Design and Optimization of Synchronous Reluctance Motor Drive System for Low-Speed Direct-Drive Mining Applications. Quaid-e-Awam Univ. Res. J. Eng. Sci. Technol.2020, 18, 19–28.
  8. Khan, H.; Yousaf, M.; Hashmi, U.; Iqbal, J.; Shaheer, M.; Umar, M. A Global System for Mobile Communication based Resource Allocation technique to control Autonomous Robotic Glove for Spinal Cord Implant paralysed Patients using Flex Sensors. Sukkur IBA J. Emerg. Technol.2020, 3, 13–23, doi:10.30537/sjet.v3i2.576.
  9. Hameed, S.; Minhas, Q.; Ahmed, S.; Nawaz, A.; Iqbal, J.; Shahzad, M.; Jan, N. Nature Inspired Optimization Techniques, A review for FANETs. Sukkur IBA J. Emerg. Technol.2020, 3, 40–58, doi:10.30537/sjet.v3i2.716.
  10. Iqbal, J.; Zuhaib, K.M.; Han, C.; Khan, A.M.; Ali, M.A. Adaptive global fast sliding mode control for steer-by-wire system road vehicles. Appl. Sci.2017, 7, doi:10.3390/app7070738.
  11. Zuhaib, K.M.; Khan, A.M.; Iqbal, J.; Ali, M.A.; Usman, M.; Ali, A.; Yaqub, S.; Lee, J.Y.; Han, C. Collision avoidance from multiple passive agents with partially predictable behavior. Appl. Sci.2017, 7, doi:10.3390/app7090903.
  12. Ali, M.A.; Kim, C.; Kim, S.; Khan, A.M.; Iqbal, J.; Khalil, M.Z.; Lim, D.; Han, C. Lateral acceleration potential field function control for rollover safety of multi-wheel military vehicle with in-wheel-motors. Int. J. Control. Autom. Syst.2017, 15, 837–847, doi:10.1007/s12555-014-0573-7.
  13. Khan, A.M.; Yun, D.; Zuhaib, K.M.; Iqbal, J.; Yan, R.-J.; Khan, F.; Han, C. Estimation of Desired Motion Intention and compliance control for upper limb assist exoskeleton. Int. J. Control. Autom. Syst.2017, 15, 802–814, doi:10.1007/s12555-015-0151-7.
  14. Khan, A.M.; Yun, D.; Ali, M.A.; Zuhaib, K.M.; Yuan, C.; Iqbal, J.; Han, J.; Shin, K.; Han, C. Passivity based adaptive control for upper extremity assist exoskeleton. Int. J. Control. Autom. Syst.2016, 14, 291–300, doi:10.1007/s12555-014-0250-x.
  15. Yun, D.; Khan, A.M.; Yan, R.-J.; Ji, Y.; Jang, H.; Iqbal, J.; Zuhaib, K.M.; Ahn, J.Y.; Han, J.; Han, C. Handling subject arm uncertainties for upper limb rehabilitation robot using robust sliding mode control. Int. J. Precis. Eng. Manuf.2016, 17, 355–362, doi:10.1007/s12541-016-0044-6.
  • Conference Papers
  1. J. Iqbal, K. Shin, and C. Han, “Neural network based control for steer-by-wire systems vehicles,” 2014, Accessed:          Jun. 21, 2017. [Online]. Available: http://www.wseas.us/e-library/conferences/2015/Dubai/CSST/CSST-09.pdf.

 

Dr Khalid Hussain Solangi

 

  1. K.H. Solangi, S. Sharif, Ibrahim OguSadiq and M.J. Hisam.Effect of tube material on convective heat transfer of various nanofluids. Journal of Thermal Analysis and Calorimetry, 2019, p 1-5. (citations 3).
  2. Imdad Ali, Abdul Latif, Khalid Hussain, Farooq KhurumShehzad, Ahmed Ali, Rehman Faisal, Li Xudong, Otavio Augusto Titton Dias, Yang Weimin, Li Haoyi. Ionic liquids enhanced performance of PVC gels actuator. Journal of Applied Polymer Science (Impact Factor: 3.11).. 2021. DOI: 10.1002/app.50710.
  3. Imdad Ali, Ahsan Ali, Ahmed Ali, Muhammad Ramzan, Khalid Hussain, Li Xudong, Zhan Jin, Otavio Augusto Titton Dias, Yang Weimin, Li Haoyi, Zhang Liyan, MohiniSain. Highly electro-responsive composite gel based on functionally tuned graphene filled polyvinyl chloride. Polymers advanced technologies (Impact Factor:
    3.66). https://doi.org/10.1002/pat.5376. 2021.
  4. K.H. Solangi, S. Sharif, Ibrahim OguSadiq and M.J. Hisam. Experimental and numerical investigations on heat transfer and friction loss of functionalized GNP nanofluids. International Journal of Mechanical Engineering and Technology (IJMET) Volume 10, Issue 08, August 2019, pp. 61-77. Article ID: IJMET_10_08_005 Available online at
    http://www.iaeme.com/ijmet/issues.asp?JType=IJMET&VType=10&IType=8
  5. K.H Solangi, Ahmad Amiri, MohdNashrulMohdZubir, S. N. Kazi, A. Badarudin. Experimental investigation of the prypylene glycol treated graphene nanoplatelets of closed conduit turbulent convective heat transfer. International communications in heat and mass transfer. 2016. Vol: 7, Pages 43-53, (citations 20), (Impact factor: 4.46).
  6. Solangi, K.H., Islam, M.R., Saidur, R., Rahim, N.A., and Fayaz, H., A review on global solar energy policy. Renewable and Sustainable Energy Reviews, 2011. 15(4): 2149-2163,(citations 903), (Impact factor: 9.18).
  7. K.H Solangi, Ahmad Amiri, S. N. Kazi, A. Badarudin. Experimental investigation of heat
    transfer performance and frictional loss of functionalized GNP-based water coolant in a closed conduit flow. RSC Advances. Volume 6, Issue 6. 2016. Pages: 4552-4563, (citations
    12), (Impact factor: 2.96).
  8. KH Solangi, SN Kazi, MR Luhur, A Badarudin, A Amiri, Rad Sadri, MNM Zubir, Samira Gharehkhani, KH Teng. A comprehensive review of thermo-physical properties and convective heat transfer to nanofluids.Energy. Vol 89, pages, 1065-108, (citations 175), (Impact factor: 4.96).
  9. MohdNashrulMohdZubir, A Badarudin, SN Kazi, Misni Misran, Ahmad Amiri, Rad Sadri, Solangi K.H. Experimental investigation on the use of highly charged nanoparticles to improve the stability of weakly charged colloidal system. Journal of Colloid and Interface Science. Volume 454, 15 September 2015, Pages 245–255, (citations 18), (Impact factor:5.09).
  10. Ahmad Amiri, Mehdi Shanbedi, K.H Solangi, BT Chew, SN Kazi. Toward improved engine performance with crumpled nitrogen-doped graphene based water–ethylene glycol coolant. Chemical Engineering Journal.Vol. 289. 2016, (citations 71), (Impact factor: 6.93).
  11. Waqas Mughal, MasroorAbro, Zhaoping Yang, K.H Solangi, Yadong He. Heat transfer performance evaluation of a novel concept of the core-hole heat exchanger for polymer foaming process..International Journal of Thermal Sciences.Vol 151, 2020.
  12. KH Solangi, R Saidur, MR Luhur, MM Aman, A Badarudin, SN Kazi, TNW Lwin, NA Rahim, MR Islam. Social acceptance of solar energy in Malaysia: users’ perspective. Clean Technologies and Environmental Policy. October 2015, Volume 17, Issue 7, pp 1975-1986,
    (citations 14), (Impact factor: 2.33).
  13. A review of Safety, Health and Environmental (SHE) issues of solar energy system. MM
    Aman, KH Solangi, MS Hossain, ABadarudin, GB Jasmon, H Mokhlis. Renewable and
    Sustainable Energy Reviews 41, 1190-1204, (citations 156), (Impact factor: 9.18).
  14. Rahim, N. A., Saidur, R., Solangi, K. H., Othman, M., & Amin, N. (2011). Survey of gridconnected photovoltaic inverters and related systems. Clean Technologies and Environmental Policy, 1-13. (citations 11), (Impact factor: 2.33).
  15. Saidur, R., Islam, M. R., Rahim, N. A., &Solangi, K. H. (2010). A review on global wind energy policy. Renewable and Sustainable Energy Reviews, 14(7), 1744-1762, (citations 445), (Impact factor: 9.18).
  16. Saidur, R., Rahim, N.A., Islam, M.R., and Solangi, K.H., Environmental impact of wind energy. Renewable and Sustainable Energy Reviews, 2011. 15(5): 2423-2430, (citations 377), (Impact factor: 9.18).
  17. M. R. Islam, R. Saidur, N. A. Rahim and K. H. Solangi(2010).Renewable Energy Research in Malaysia. Engineering e-Transaction (ISSN 1823-6379) Vol. 4, No. 2, December 2009,
    pp 69-72 Online at http://ejum.fsktm.um.edu.my, (citations 33).
  18. KH Teng, SN Kazi, Ahmad Amiri, AF Habali, MA Bakar, BT Chew, A Al-Shamma'a, A Shaw, K.H Solangi, Ghulamulah Khan. Calcium carbonate fouling on double-pipe heat exchanger with different heat exchanging surfaces. Powder Technology , Volume 315, 15 June 2017, Pages 216– 226, (citations 15), (Impact factor: 3.20).

 

  1. Rad Sadri, Maryam Hosseini, SN Kazi, Samira Bagheri, NashrulZubir, K.H Solangi, Tuan Zaharinie, A Badarudin. A bio-based, facile approach for the preparation of covalently functionalized carbon nanotubes aqueous suspensions and their potential as heat transfer fluids. Journal of colloid and interface science, 2017,volume 504, pages 115-123, (citations 10), (Impact factor: 5.09).
  2. Samira Gharehkhani, HoomanYarmand, Mohammad Shahab Goodarzi, SeyedFaridSeyed Shirazi, Ahmad Amiri, MohdNashrulMohdZubir, Khalid H Solangi, Rushdan Ibrahim, Salim NewazKazi, SomchaiWongwises. Experimental investigation on rheological, momentum and heat transfer characteristics of flowing fiber crop suspensions. International Communications in Heat and Mass Transfe Volume 80, January 2017, Pages 60–69, (citations8),(Impactfactor:4.46).
  3. M. R. Islam, R. Saidur, N. A. Rahim and K. H. Solangi (2010).Usage of Solar Energy and Its Status in Malaysia, Engineering e-Transaction (ISSN 1823-6379) Vol. 5, No. 1, June 2010, pp 6- 10, Online at http://ejum.fsktm.um.edu.my Received 5 May 2010; accepted 28 May2010,(citations22).
  4. Energy policy to promote photovoltaic generation. SM Moosavian, NA Rahim, J Selvaraj, KH Solangi. Renewable and Sustainable Energy Reviews 25, 44-58, (citations 164), (Impactfactor:9.18).
  5. M R Islam, N A Rahim, K H Solangi, R Saidur. Assessing wind energy potentiality for selected sites in Malaysia. Energy Education Science and Technology Part A-Energy Science andResearch,(citations13),(Impactfactor:0.1).
  6. MM Aman, GB Jasmon, KH Solangi, AHA Bakar, H Mokhlis. Optimum simultaneous DG and capacitor placement based on minimization of power losses. International Journal of Computer and Electrical Engineering.2013, Vol. 5, issue 5. 516-522, (citations 36), (Impact factor:0.3).
  7. Muhammad RamzanLuhur, Abdul Latif Manganhar, K.H. Solangi. A review of the stateof-the- art in aerodynamic performance of horizontal axis wind turbine. Wind and Structures An International Journal. January 2016, (citations 3) (Impact factor: 0.46).
  8. NA Madlool, R Saidur, HH Mohammed, KH Solangi, NA Rahim. Energy savings measures for clinker production in cement industry. Advanced Materials Research 347, 3120-3125, (Impactfactor:0.12).
  9. M.R Luhur, A.L Manganhar, S.H Siyal, K.H Solangi. Analysis of force dynamics for airfoil in the wake of different grids.Engineering, science & technology, 2015. 17, 1, (Impact factor:0.53).
    28. K.H. Solangi, S. Sharif, Ibrahim OguSadiq and M.J. Hisam. Experimental and numerical investigations on heat transfer and friction loss of functionalized gnpnanofluids. International Journal of Mechanical Engineering and Technology. Vol. 10 (08), 2019, pp. 61-77.
  10. K.H. Solangi, S. Sharif, Ibrahim OguSadiq and M.J. Hisam.Effect of size on the heat transfer performance of graphene nanoplatelet and metal oxide nanofluids: An experimental investigation.Materialsletters(Underreview).
  11. K.H. Solangi, S. Sharif, Ibrahim OguSadiq and M.J. Hisam. Experimental study of thermophysical and stability of coconut oil modified XGnP nanoparticles as sustainable lubricant. Applied Thermal Engineering (Under review).

 

CONFERENCE PROCEEDINGS

  1. K.H Solangi, Lianyi Chen. Metal matrix nanocomposites powders for laser powder bed fusion, Solid Freeform Fabrication Symposium, Austin Texas, USA, 2017.
    2. K.H Solangi, Minglei Qu,,QilinGuo, Lianyi Chen. Additive Manufacturing of Stainless
    Steel Nanocomposites.    Solid Freeform Fabrication Symposium, Austin Texas, USA, 2018.
    3. KH Solangi, R Saidur, NA Rahim, MR Islam, H Fayaz. Present solar energy potential and strategies in China. Second International Conference on Environmental Science and Technology (ICEST 2011) Singapore, (citations 6).
    4. KH Solangi, ABadarudin, SN Kazi, TNW Lwin, MM Aman. Public acceptance of solar energy: The case of Peninsular Malaysia. TENCON Spring Conference, 2013 IEEE, 540-543,(citations 8).
    5. Solangi, K.H., Badarudin, A., Kazi, S.N., Aman, M.M. A comparative study of Electricity Situation in Bangladesh, India, Malaysia and Pakistan. 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013).2013/7/2
    6.K.H Solangi, R, Saidur, N.A. Rahim, M.R. Islam and H. Fayaz.Current solar energy policy and potential in Malaysia. 3rd International Conference on Science and Technology Application in industry and education, ICSTIE 2010 UiTMPulau Pinang Malaysia, 16-17 December, 2010, Paper No. 31, (citations 1). 7. K.H Solangi, T.N.W. Lwin, N.A. Rahim, M.S. Hossain, R. Saidur, H. Fayaz. Development of Solar Energy and Present Policies in Malaysia.2011 IEEE First Conference on Clean Energy and Technology CET. 978-1-4577-1354-5/11/$26.00 2011 © IEEE, (citations 17).
    8. M.R. Islam, R, Saidur, N.A. Rahim, K.H Solangi. Assessment and Analysis of Wind Energy Potential at Mersing, Malaysia. 3rd International Conference on Science and Technology Application in industry and education, ICSTIE 2010 UiTMPulau Pinang Malaysia, 16-17 December, 2010, Paper No. 13.
    9. Global solar energy use and social viability in Malaysia. MS Hossain, NA Rahim, KH Solangi, R Saidur, H Fayaz, NA Madlool. Clean Energy and Technology (CET), 2011 IEEE First Conference on, 187-192. 27-29 June 2011. Kuala Lumpur, (citations 10).
    10. Fayaz, H.; Rahim, N.A.; Saidur, R.; Solangi, K.H.; Niaz, H.; Hossain, M.S. Solar energy policy: Malaysia vs developed countries. Clean Energy and Technology (CET), 2011 IEEE First Conference on Year: 2011. Pages: 374 378, DOI: 10.1109/CET.2011.6041512, (citations 18). Google scholar link: https://scholar.google.com/citations?user=Pi3_IPkAAAAJ&hl=en
    ResearchGate Link: https://www.researchgate.net/

 

Engr. Ahmed Ali Sohu

 

  1. Samo, S. R., K. C. Mukwana, and A. A. Sohu. "Potential of Solid Waste and Agricultural Biomass as Energy Source and Effect on Environment in Pakistan." Handbook of Climate Change Mitigation and Adaptation(2014): 1-54.

 

 

Engr. Ishfaque Ali Qazi

 

  1. QAZI I, ABBASI A, JAMALI M, TUNIO IA, BHATTI M, QAZI Q. Dynamic structural analysis of connecting rod through adaptive mesh refinement for different materials. Sindh University Research Journal-SURJ (Science Series). 2018 Dec 14;50(4):561-70

 

  1. Qazi, IA, et al “Novel Adaptive Mesh Refinement Technique for Dynamic Structural Analysis of Connecting Rod ASIAN JOURNAL OF ENGINEERING, SCIENCES & TECHNOLOGY”, VOL.8, ISSUE 1 MARCH 2018.

 

  1. Jamali QB, Bhatti MT, Qazi QA, Kaurejo BH, Qazi IA, Solangi SH, Jamali AS. Analysis of CO2, CO, NO, NO2, and PM particulates of a diesel engine exhaust. Engineering, Technology & Applied Science Research. 2019 Nov 30;9(6):4912-6.

 

  1. Kazi QA, Jamali QB, Bhatti MT, Rajput UA, Kazi IA, Solangi SH. Development of Vinyl Ester and Reed Composite Material with Weight Fraction of 10% and Reinforcement at Different Orientations. Engineering, Technology & Applied Science Research. 2019 Jun 8;9(3):4306-9.

 

  1. Bhayo FA, Bhatti MT, Abbas Z, Banghwar S, Qazi IA. Quantitative Analysis of Petroleum Consumption and CO2 Emission of Mining and Quarrying Industry of Pakistan. American Scientific Research Journal for Engineering, Technology, and Sciences (ASRJETS). 2018 Jul 31;45(1):84-95.

 

  1. Bhangwar S, LiquatAM, Bhatti MT, Laghari AA, Qazi IA, Khoso MA. Comparative Performance Analysis of Compression Ignition Engine using Biodiesel and LPG as Additive. American Scientific Research Journal for Engineering, Technology, and Sciences (ASRJETS). 2018 Jul 31;45(1):75-83.

 

  1. Ali I, Memon AH, Bhatti MT, Kumar D, Qazi IA, Banghwar S. Dynamic Fluid-Structure Interaction Analysis of Propeller Aircraft Wing. American Scientific Research Journal for Engineering, Technology, and Sciences (ASRJETS). 2018 Jul 28;45(1):64-74.

 

  1. Lakho MA, Bhatti MT, Rajpar AH, Khoso MA, Qazi IA. Comparrative tensile behaviour study of locally developed jute reinforced composite materials with conventional composite materials. Advances in Materials and Processing Technologies. 2018 Jul 3;4(3):370-7.

 

  1. ALI I, KUMAR D. DYNAMIC STRUCTURAL AND MODAL ANALYSIS OF TYRE COUPLING ON UNSTRUCTURED MESH. Engineering and Technology Research. 2017 Jul 31:89.

 

Engr. Zeeshan Qadir Memon

 

  1. Q. Memon, and W. Pao, F. M Hashim, H. M. Ali, “Experimental Investigation of Two-Phase Separation in T-Junction with Combined Diameter Ratio,” Journal of Natural Gas Science & Engineering, Pages 103048, year 2019. (I.F: 3.909). https://doi.org/10.1016/j.jngse.2019.103048
  2. Pao, F. Ejaz; M. S. Nasif; A. Saieed; Z. Q. Memon; M Nuruzzaman, “A Review: Evolution of Branching T-junction geometry in terms of Diameter Ratio, to improve Phase Separation,” Engineering Science and Technology, an International Journal, (I.F: 4.43). https://doi.org/10.1016/j.jestch.2021.02.003
  3. Q. Memon, and W. Pao, “Two-Phase Separation in a Converging T-junction with combined diameter ratios in side arm,” Journal of Petroleum Science and Engineering (Under Review, I.F: 3.157).
  4. Pao and Z. Q. Memon, “Numerical evaluation of separation efficiency in converging T-junction with slug flow”, International Journal of Numerical Methods for Heat and Fluid Flow. (I.F:1.958). https://doi.org/10.1108/HFF-07-2019-0524
  5. Saieed, Z. Q. Memon, W. Pao, “A Multiphase Flow Loop Design For Investigating the Partial Phase Separation in a Pipe Tee,” Acta Polytechnica (2019) ( I.F: 0.909). https://doi.org/10.14311/AP.2019.59.0399
  6. Q. Memon, W. Pao, and F. M. Hashim, “Experimental Investigation of Two-Phase Separation in a Horizontal T-Junction with Vertical Branch Arm,” Journal of Mechanical Engineering and Sciences, 13, no. 4 (2019): 5922-5937. https://doi.org/10.15282/jmes.13.4.2019.14.0470
  7. Q. Memon, W. Pao, F. M. Hashim, and S. Ahmed “Experimental Investigation of Multi-Phase Separation in Different Flow Regimes Through T-Junction With an Expander Section, Journal of Mechanical Engineering and Sciences, A vol. 13, no. 2, pp. 5163-5181, 2019.

https://doi.org/10.15282/jmes.13.2.2019.27.0424

 

  1. Q. Memon, C. M. Tran, W. Pao, and F. M. Hashim, “Two-phase slug flow separation at T-junction with regular and reduced vertical side arm,” in AIP Conference Proceedings, vol. 2035, p. 050001, 2018. https://aip.scitation.org/doi/10.1063/1.5075572
  2. Tran, Z. Memon, A. Saieed, W. Pao, and F. M. Hashim, “Numerical simulation of two-phase separation in T-junction with experimental validation,” Journal of Mechanical Engineering and Sciences, vol. 12, no. 4, pp. 4216–4230, 2018. http://journal.ump.edu.my/jmes/article/view/554
  3. Tran, Z.Q. Memon, W. Pao, and F.M Hashim, “Preliminary Results of Numerical Simulation of Slug Flow in a Regular T-Junction,” MATEC Web of Conferences 2018, 225.

https://doi.org/10.1051/matecconf/201822503001

 

 

Engr. Sajjad Hussain Solangi

 

  1. Solangi, S. H., et al. "Investigation of Quantity, Quality and Energy Content of Indigenous Sugarcane Trash in NaoshehroFeroze District, Sindh." Engineering, Technology & Applied Science Research6 (2018): 3609-3613.

 

 

Engr. Tarique Ahmed Memon

 

  1. Adeela Kiran, Usman Ali, Amjad Hussain, Hafz Muhammad Rizwan Ahmad, Faheem Abbas, Tarique Ahmed Memon, Abid Hussain. Molecular designing of tetra‑aryl‑p‑benzoquinones derivatives toward strong optical properties. Chemical Papers
    https://doi.org/10.1007/s11696-021-01834-1

2.      Tarique Ahmed Memon, Khanji Harijan, Mujeeb Iqbal Soomro, Suresh Meghwar, Gordhan Valasai and Hafeez Khoharo (2017) “Potential of Electricity Generation from Rice Husk-A Case Study of Rice Mill” Research paper published in Sindh University Research Journal (ScienceSeries), (HEC Category: X), Vol. 49, No. 3, pp: 495-498.

 

  • Conference Proceedings
  1. Tarique Ahmed Memon, Khanji Harijan, Mujeeb Iqbal Soomro, and Laveet Kumar “Assessment of Electricity Generation Potential and Emissions From Rice Residues In Pakistan”, in 7th International Conference: Environmentally Sustainable Development – ESDev-VII. August 26-28, 2017. COMSATS Institute of Information Technology (CIIT) Abbottabad, Pakistan.

 

 

Engr. MantharKhoso

 

  1. Mushtaque Ahmed Lakho, M. Tarique Bhatti, Altaf Hussain Rajpar, Manthar Ali Khoso&Ishfaque Ali Qazi, “Comparrative tensile behaviour study of locally developed jute reinforced composite materials with conventional composite materials.”, Journal of Advances in Materials and Processing Technologies (JAMPT), Taylor & Francis Group, vol. 4, issue 3, 12 March 2018. ISSN: 2374-068X (Print) 2374-0698, (Online) Journal homepage:

 

  1. Asif Ali Laghari, Shafiq-ur-Rehman , M. Tarique Bhatti, Allah Rakhio, Manthar Ali Khoso, and SajjadBhangwar, “Role of single bump over the surface of E398 Airfoil to improve the aerodynamic performance”, International Journal of Advance Research, Ideas, and Innovations in Technology (IJARIIT), vol 4, issue 4, pp 550-556, July 2018. ISSN: 2454-132X,

 

  1. SajjadBhangwar , A.M Liquait, M. Tarique Bhatti, Azher Shah, Manthar Ali Khoso, and Asif Ali Laghari, “Impact of biodiesel and LPG on injector deposit formation.”, International Journal of Advance Research, Ideas, and Innovations in Technology (IJARIIT), vol 4, issue 4, pp 557-561, July 2018. ISSN: 2454-132X.

 

Engr. Asif Ali Laghari

 

  1. Asif Ali, Lingfei Qi, Tingsheng Zhang, Hai Li, Ali Azam, Zutao Zhang, “Design of novel energy-harvesting regenerative shock absorber using barrel cam follower mechanism to power the auxiliaries of a driverless electric bus”, Sustainable Energy Technologies and Assessments, Vol 48, 2021, 101565, https://doi.org/10.1016/j.seta.2021.101565
  2. Ali Azam, Ammar Ahmed, Muhammad Sajid Kamran, Li Hai, Zutao Zhang, Asif Ali, “Knowledge structuring for enhancing mechanical energy harvesting (MEH): An in-depth review from 2000 to 2020 using CiteSpace”, Renewable and Sustainable Energy Reviews, Vol 150, 2021, 111460,https://doi.org/10.1016/j.rser.2021.111460
  3. H Pan, H Li, T Zhang, AA Laghari, Z Zhang, Y Yuan, B Qian, A portable renewable wind energy harvesting system integrated S-rotor and H-rotor for self-powered applications in high-speed railway tunnels. Energy Conversion and Management 196, 56-68, 2019
  4. Asif Ali Laghari, Shafiq-ur-Rehman, M. Tarique Bhatti, Allah Rakhio, Manthar Ali Khoso, SajjadBhangwar, Role of single bump over the surface of E398 Airfoil to improve the aerodynamic performance, International Journal Of Advance Research, International Journal Of Advance Research Ideas And Innovations In Technology (Issn: 2454-132x) , 2018
  5. SajjadBhangwar, A. M Liquat, M. Tarique Bhatti, Azher Shah, Manthar Ali Khoso, Asif Ali Laghari”, Impact of biodiesel and LPG on injector deposit formation”,  International Journal Of Advance Research, Ideas And Innovations In Technology (Issn: 2454-132x)”
  6. Abdul Hameed Memon, Asif Ali, Muhammad Adeel, Muhammad Tahir, Muhammad Junaid, Awais Ahmed “Assessing the Performance of Diesel Engine Using Bio-diesel Produced from Mustard Oil Locally Available in Pakistan’ First International Conference on Emerging Trends in Engineering, Management and Scineces”December 28-30, 2014 (ICETEMS-2014) Peshawar, Pakistan
  7. Jianqiang Yu, Xiaomin Dong, Pinggen Chen, Allah Rakhio, Asif Ali, “Optimal Design Methodology of Magneto-Rheological (MR) Rotary Brake for Robotic Ankle Systems Considering Temperature Effects”, 2nd IEEE ICRAI-2016 Rawalpindi, Pakistan.
  1. Allah Rakhio ,Dong Xiamin, Chen Pengon, Muhammad Nadeem Iqbal, SajjadBhangwar, Asif Ali, “Review-Vane Type Magneto-rheological Damper” 2017 IEEE 3rd Information Technology and Mechatronics Engineering Conference (ITOEC) October 3-5,2017

 

 

Engr. Athar Ali Khan

 

  1. Imran Rab Nawaz, Ting Wang, Athar Ali Khan Gorar, Adnan Ghani Soomro, Syed Kamran Sami, Ahmer Hussain Shah, Jun Wang, Wen-Bin Liu, Syed Haseeb Sultan, Aijaz Ahmed Babar, Abdul QadeerDayo, “Pinecone particles filled polybenzoxazine composites: Thermomechanical and mechanical properties”, Journal of Applied Polymer Science, Vol: 138, IS 43, https://doi.org/10.1002/app.51279

 

  1. Sadia Kiran, Athar Ali Khan Gorar, Ting Wang, Abdul Qadeer Dayo, Li-Li Zhang, Jun Wang, Ahmer Hussain Shah, Syed Kamran Sami, Wen-Bin Liu, “Effects of hollow glass microspheres on the polybenzoxazine thermosets: Mechanical, thermal, heat insulation, and morphological properties”, Journal of Applied Polymer Science, 51643, https://doi.org/10.1002/